I am getting to the point of seriously planning to layout my new shop. It shares a roof with my boat shed but will basically be 28' x 10'. I know it's pretty narrow, so I really need a good plan to lay this out. My current thoughts are to line as much down one wall as possible with possibly a workbench on one of the short walls. I have a lot to fit in here and there will be expansion in the future, but this is what I have to work with right now. Current tools that will need dedicated space:

Table Saw
14" Radial Arm Saw
Band Saw
Miter Station
6in Jointer
Shaper
13" Planer

I would like to share infeed outfeed space as much as possible. I know you guys know what you'r doing so I'm counting on some bigtime help.

There are no walls as of now, just a concrete pad, so I don't have any problems with doors, etc. I would like to have a 36" man door and a 6' - 8' sliding door. Thanks in advance for all the help.

-Todd