I am using 7/8"x3 1/2"x6" plinth blocks at the door casing bases. The ??? I have is should I also use plinth blocks at the corners? Should they be full size or split in half? What height should I make the oak baseboard. I am putting a small ogee on the top edge. Should I use blocks at the corners? Or just do the usual miter & cope?
The top of the doorways & all the widows are picture framed with rosettes. Here is a pic of my bay window. Since this is an 1874 house, there is not a consistent angle anywhere.
Thanks for any advice.
Al