I have been building small boxes for years, that said, do any of you have any secerts on keeping the bottom and the ops true at glue up. I use 45's and no matter how careful I am the box will never come out to set true without some sanding. If there is no great secret then how is the best way to true the up? Maybe an enge sander? The reason I am asking is I seem to be making more and more at a time, so anything to slimline the process would help me out.
Thanks.
Boxes are usually between 4 and 12 inches high, 2 to 8 inches deep. How about a jointer?