Opinions on Saw/Jigsaw for Blanks
Hi, new member here. I am in the process of getting a lathe to
start turning bowls, vases, boxes, etc...
I have a spare room in my apartment that I will be using as a
small workshop. Now, being an apartment, a chainsaw or other
high powered saw, for roughing out blanks is not possible.
I am trying to keep the noise down to a minimum, so am looking
at a smaller saw to do the job. I won't be cutting down trees with
it and more or less just want it to, as I said, rough out blanks.
So, anyone ever use one of these?
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=253437430 3512764&PRODUCT%3C%3Eprd_id=845524442543375&ASSORT MENT%3C%3East_id=1408474395348027&bmUID=1098676340 447&assortment=primary
Was wondering if it would be good for roughing out blanks.
Thanks,
James
P.S. No affiliation with CT, just using it as a reference so you can
see what saw I am referring to.