Well guys, Ive been a member here for a couple of years, and only posted a few times, but I have gained a lot of ideas and good tips from your posts. Like most of you guys Ive always wanted to build that "perfect workbench", and after about 4 years Ive come pretty close. I started about 4 years ago and built a metal frame out of 3" square tubing and 4" thick Ash for the top. Of course just as soon as I got the frame and the top done I had to rush it into service for some other projects that moved to the front burner. Each year I would decide I needed to build that set of cabinets to fit under it, and each year something else would become a hotter project. So after 4 years of service I finally decided that the cabinets would be first on the list this year. I started on them back in February, of course then the Ice Storm hit and shut down production for about a month. Slowly I finished the drawers and frames, and the LOML completed it this week by staining it. We decided to stain the drawers three diffrent colors to make it stand out. So here are a few pictures of her all finished, let me know what you guys think......