Anybody have this image (or one very similar) in .cdr or .eps? Thank you
Anybody have this image (or one very similar) in .cdr or .eps? Thank you
Tom
________________________________________
FireBeam Awards and Engraving
Epilog Helix 45 -- Corel X4 -- Photograv 3.0 --
Retired Fire Chief/EMT/CFPS
"My wife says I don't listen to her...or something like that..."
hope that this works
Sorry, unable to upload eps format and PDF file is 205K creek limit is 156K
Zip the file and you can upload 1.91 mb
Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender
Thanks Dave! That's gonna work.
Tom
________________________________________
FireBeam Awards and Engraving
Epilog Helix 45 -- Corel X4 -- Photograv 3.0 --
Retired Fire Chief/EMT/CFPS
"My wife says I don't listen to her...or something like that..."
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5