Great looking piece. I am in the process of fiinishing something similar and it was an interesting turn with only 3 trunk sections but over 1/3 open section. You had a lot of branch sections hanging out there. I hope all your knuckles are still intack. I ended up doing a lot of heavy sanding after using the scraper for hollowing out and having so much air involved with the turned surface.
Thanks so much for the compliments and comments. There was a lot of stationary hand sanding involved. I used wet/dry 320 on up to 1K using MinWax 209 Natural and then buffed. Again, thanks for the compliments. jg