I dont post often but read the forum every day. I have seen many threads on infil building so heres my attempt. Its not aesthetically perfect and i made many mistakes along the way but it works like no other plane I own. The casting was a rough casting from St. James Bay Tool along with rough casted lever cap and finished cap screw. It took six months of an hour or two here and there. I can plane wood i could not touch with any other plane i own including my BU smoother wit 35 degree blade. The infill has a 3/16 Lee-Valley blade BD wit no chipbreaker at 60 degrees. Just wanted to share my pics of my new toy and say thanks for the inspiration.