I am also working on my version. I found an X- Axis table on Ebay (pictured in next post) and will turn it into the mortisers X axis as shown in my drawing.
I am also working on my version. I found an X- Axis table on Ebay (pictured in next post) and will turn it into the mortisers X axis as shown in my drawing.
Last edited by Guy Kowalski; 04-24-2003 at 9:09 PM.
Guy
<b><i>Master of the Hounds from Hell</i></b>
I bought this Z-Axis table for cheap on eBay....
Guy
<b><i>Master of the Hounds from Hell</i></b>
I will use the above slide for the Z-Axis portion of the mortiser as diagrammed in the drawing below....
Guy
<b><i>Master of the Hounds from Hell</i></b>