Made this table with my son over the holidays. Table is 13.5" x 10" x 29" high. It is made from quarter-sawn White Oak with Maple for the drawer sides and botttom. Finished with BLO and Wax finish. Still have a couple of more coats of finish to apply.
All joinery is mortise and tenon. Dovetails cut by hand. Top, shelf, and lower sections of legs were chamfered to provide some design consistency yet still allow for the lower shelf to be attached in a unique way.
Lower shelf was designed because the table without the shelf looked too top-heavy. I used brass rod drilled into the chamfered legs and shelf at 45 degree angles to allow it to "float" in the design.
All-in-all, I'm pretty pleased with the outcome, but feedback welcome.
Neil