Anyone have a link or guide specifying compound angles, cutter angles, back and side releif, etc?
Appreciate it.
Thanks,
Eric
Anyone have a link or guide specifying compound angles, cutter angles, back and side releif, etc?
Appreciate it.
Thanks,
Eric
You'll probably have better luck in one of the woodworking forums... most people in this forum are laserheads.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Eric
If you're referring to rotary engraver cutter sharpening two of our members do that. Let me know and I'll put you in touch.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Sorry, I am referring to rotary engraver sharpening. I have a New Hermes sharpener and it works fine, I just need specs for different material types.
Thanks,
Eric
I just sent a PM.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Check out this site. There are FAQ and fact sheets that should answer you questions.
http://www.antaresinc.net/