I'm planning to start using water-based spray finishes and have been working on building a knock-down spray booth. I've decided to try some things ahead of time so that I can be ready for my next project. To date, I've mostly been using stain, followed by Minwax wipe-on poly or Watco danish oil. I've used BORG shellac on some shop projects and BLO on my recently completed workbench and tool cabinet. What I don't like about the wipe-on finishes is the amount of time required to complete the process and the fact that my hand usually starts to cramp up from holding the cloth. I do like the end result of these finishes but I'd like to get the speed of spraying.
So my question is what are people using in water-base that is working well and where do you get it? I've heard about Target Coatings, Fuhr, and Homestead Finsihing, but am unclear on what products