I have been messing around with this for a couple months now and here's what I came up it.
Wood -- Curly maple
Kit is a Serria --Gun Metal
Homemade Decal---
I have been messing around with this for a couple months now and here's what I came up it.
Wood -- Curly maple
Kit is a Serria --Gun Metal
Homemade Decal---
---I may be broke---but we have plenty of wood---
Nice decal.I finally figured out the decal part myself.It took me a few months and alot of questions to get it right.
Donny
That's a nice looking pen, Gary. I think the kit finish and decal look great together.
Nice job. Decals done right, like this one, can really make a nice statement.
"If the women don't find you handsome they should at least find you handy" -Red Green
Hi Gary, sweet looking pen. Do you put a finish over the decal or just glue the decal over the finish? BTW, I have been giving the stone crusher a real workout lately, still working good.
Gary
__________________________________________
RL 40 6040 40 watt laser, Coral X4, Compucarve, 9x42 Bridgeport mill, 13x36 Clausing toolroom lathe, Reid 2c surface grinder, Legacy ornamental mill, Jett vs mini lathe, and FIRE - micro flame polisher.
Great looking combo Gary. I have some of the decal material but have not tried to use it as yet. Not getting a lot of shop time in this weather.
____________________________________________
JD at J&J WoodSmithing
Owingsville, Kentucky
"The best things in life are not things."
I like what you. I'm wondering what a black wood, would look like at the top and bottom of the decal? An all black pen with a maple outline stenciling of the POW?
Have a Nice Day!
Really nicely done Gary. Sweet pen.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
The Decal sticks to the wood by itself---most of the time.
I put a top coat of Spray Laq. over the decal using a rattle can.
---I may be broke---but we have plenty of wood---
Gary
__________________________________________
RL 40 6040 40 watt laser, Coral X4, Compucarve, 9x42 Bridgeport mill, 13x36 Clausing toolroom lathe, Reid 2c surface grinder, Legacy ornamental mill, Jett vs mini lathe, and FIRE - micro flame polisher.