I have some mostly unused space underneath my three work benches that I made many years ago. And, I want to organize things in my new workshop properly. Yesterday, I decided that the quickest way to do something about this was to purchase the following ready-made drawers from Lee Valley: http://www.leevalley.com/wood/page.a...=1,43326,43330
Today I made the cabinet and installed the drawers. Here is a breakdown of the time taken:
4 minutes -find scrap MDF and plywoodHere are some photos:
22 minutes -design, measure, and layout
83 minutes -cut
35 minutes -assemble
5 minutes -take photos
1) Bench before installing the drawers
2) Cutting groves in the MDF
3) Method used to keep groves square towards bottom of sides
4) At the very bottom, I had to use a square
5) Bench after installing the drawers