this is the beggining of a 4.5" thick 72"x72" walnut seal for the USMC in cherrypoint nc. will post results on completion in the gallery, more to come
jim
this is the beggining of a 4.5" thick 72"x72" walnut seal for the USMC in cherrypoint nc. will post results on completion in the gallery, more to come
jim
Well.. I can almost make it out...
Cool though!
Looking forward to more pix!
CarveWright Model C
Stratos Lathe
Jet 1014
Half-a-Brain
Looks good Jim could you provide more details for example bits and cutting time.
Mick
Hardware:Software:
CAMaster 508 ATC + Recoil
2013 Trotec Speedy 100, 60 watt, rotary attachment, vector grid.
CoralDraw - Aspire 9 - EnRoute
Custom Architectural Signage
Mick Martin Woodworking
i had the flu so the fellows ran the machine today sending me pics and watching it on the webcam from the house, so i will check the run time tommorrow, i would say 11 to 13 hours
Beautiful work James. I can't wait to see the finished piece!
I'm a relative newcomer to this part of Sawmill; do you have some posted details on your machine and the software you use for both drawing and writing code? I'm sure you've written it out more times than you care to count, but I can't seem to pin it down...
I get to play with a Multicam router. We do a lot of neat stuff, but it's nowhere near your caliber of work!
my machines are built in calhoun GA just a stones throw from buford!! i have the camaster x3 and have been wanting to start on another machine and it is looking like spring now. maybe i can talk joey into having it ready by the next aspire gathering, i use the aspire software this was done with the new version that most are just getting as they released it yesterday
Looks like you might have used the slice feature?
jim
yep they wanted it to have a full rounded globe and the file when stretched at 60" flattened it out so i used aspire to raise the depth, will run the rest of it tomorrow
I can't wait to see it finished. It looks great already. Nice work.
Scott Challoner
30W LaserPro Spirit (Need more power)
30W Wisely Fiber Galvo
Very cool, can't wait to see the finished version.
Jim
Looks awesome.
BTW, I love your style - spindle and two routers and no DC! Sweet setup!!Cant wait to see you collect for three spindles!
Glad its my shop I am responsible for - I only have to make me happy.
just do not use it all the time
http://www.youtube.com/watch?v=Sku-gFA7qnM
in the pics you can see tony the tower and the 20 hp vac for the table is under the dusat collector,
got another 15 hp to add when i get around to it, sold the older single head machine and been kickin my self in the arse ever since, now the new owner will not sell it back to me
file ran well and i got back to work yesterday, hopefully by monday we can prep for install
Jim it looks great.
Joey Jarrard
US Router Tools
Nice job Jim.
Mick
Hardware:Software:
CAMaster 508 ATC + Recoil
2013 Trotec Speedy 100, 60 watt, rotary attachment, vector grid.
CoralDraw - Aspire 9 - EnRoute
Custom Architectural Signage
Mick Martin Woodworking