Finish sanded this one today and wiped on some polymerized tung oil, it wasn't the easiest to sand, being it was warped a bunch, but got it done nevertheless
It is Siberian Elm with a little spalting in the way of light coloration, it is 9" X just about 3" high, it is pretty thin, certainly less than 1/8" haven't measured it to say exactly .
Anyway don't be looking for comments for at lest 2 weeks, when I'll be all warmed up and fatter/relaxed etc
Comments welcome anytime
Siberian Elm bowl.jpg Siberian Elm bowl 1.jpg Warped Siberian Elm profile.jpg Siberian Elm bowl bottom .jpg