Hi. I am trying to determine if the Hammer dado set ($729) is worth the cost in comparison to the Forrest Dado King? I plan to use the dado set for dado's in plywood (various types) and box joints for drawers. My understanding is that the Dado King will do an excellent job, but will leave minor "bat ears," which are not very desirable in box joints. I have heard that the Hammer dado set will produce flat bottoms, but causes tear-out in plywood. I have thought about getting the Dado King for plywood dado's and doing box joints on the router table, however, just bought a Hammer K3 slider and would like to use it for things like box joints. If anyone out there has the Hammer dado set, please help me with your opinions and observations. I also considered getting two sets of Dado Kings and getting one of them ground differently for use on solid stock to eliminate bat ears for the box joints.
Thanks, Brian