I bought a used graco 900. It was very clean and only cost $200. The person I bought it from had bought it used and said he never ended up using it and didn't really know how.
Before I paid for it I put some water in it just to see if it would spray and it did. Almost turned the water into a cloud of vapor.
I have a #3 tip which should spray latex. I am spraying a floor paint which is pretty thick though. It just splatters the floor paint so I kept thinning it but even when thinned fairly well I am not getting a fine spray of paint. Just spurts.
Is this a problem with the gun like the gun is worn out or is the turbine bad? The gun is the original gun so its pretty old.