So I now have few bowls under my belt and I think I'm ready for the blank I've been asked to turn for a friend's dying father (no pressure right?) I think I've decided on using a glued waste block so I don't lose much of the wood as its only 2 3/8 thick. My first instinct was to turn the bowl so shape of the bowl follows the grain (see pencil line) but, as you can see from the pictures its quite warped the other direction. Should I turn this bowl with the warp or against the warp based on where the grain is running?
Also - glue choices are CA Glue, Epoxy, Gorilla Glue. Recommendations?