This burl came from one of my jobs last year and since it was basically solid and not much in the way of bark inclusions I decided to get as large a bowl as I could, Had I known it was so stable upon drying, I would have tried for more cores. After a year it was only 1/8" out of round. The larger bowl is 15-1/2" and the smaller is about 11". I got two more smaller cores that I can't seem to find. Both bowls got thin coats of shellac before final cuts and sanding, then two coats of DO. I was very relieved to get these off the lathe. C&C always welcome and thanks for looking.