Originally Posted by
Jim Matthews
No way would I bring a high dollar LV tool to the job site - that's too much temptation for the mooks I work with to bear.
LOL.....I know what you mean. My crew is my son and it takes him about 5 minutes on a jobsite to step on and bend it or coat the edges and obliterate the markings with thinset/concrete. We're on our third BORG framing square this year. If I buy an expensive square for the woodworking shop it's gonna stay in the shop
Last edited by scott vroom; 06-05-2011 at 11:47 AM.
Scott Vroom
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.