46-460 extension

[Wally Wenzel]

46-460 011 (600 x 450).jpg46-460 007 (600 x 450).jpg46-460 012 (600 x 450).jpg46-460 009 (600 x 450).jpg46-460 010 (600 x 450).jpg46-460 008 (600 x 450).jpgHad a request for pics. of my home made bed ext. I don't know if i know how to do it but will try.
Wally

[Terry Murphy]

WOW! That is great.
What kind of wood did you use?
When i am ready, I am going to try that. Thanks for sharing.

[Russell Eaton]

Wally that is pretty slick. I think you might have saved a couple of buck with that trick.

[Jerry Marcantel]

Wally, good job. Have you been using it, and if so, do you get any flex. .... Jerry (in Tucson). PS, I made a tool holder just like the one you have in the last picture......

[Don Alexander]

thanks for posting the pics i think that was a significant savings over buying the factory made extension and looks like it would work quite well

[Donny Lawson]

That looks like something I could use.Thanks

[Wally Wenzel]

To answer the questions ,Terry i used some eight quater oak for the ways on the ext. Jerry, I don't do a lot of spindal turning but it works just fine for what i have done and seems to be very solid as is the bench that it is fastened to, the tool holder you refered to only holds the tools i don't use much, a while back i bought a 5 drawer metal rolling tool cabinet from Sears and added a piece of carpet to the top and keep the tools i use more on the top of that.
Wally