Lately the cuts on my TS have not been square, so tonight I checked the blade alignment, and it's a bit off. So I figure it's just a simple matter of re-aligning it. Well, I must be going dense, because I can not for the life of me figure out how to re-align my blade. I have a Delta 36-650, and it mentions nothing about re-aligning the blade in the instruction manual. I looked inside the saw and could not see how to do it. There has got to be a way to adjust the blade alignment. Am I missing something here? I can't believe Delta would make a saw that you could not re-align the blade. Please help before I lose what's left of my sanity.
George