This was a Beast in every sence of the word, trying to get the alignment correct for each wheel, with each brass pin was a trial in patience to say the least. My Beast contains 33 indivdualy turned parts including the brass locking pins and walnut lugs. The lid of the interior chamber is held in place by 8 mini-mite magnets, 4 in the lid, and 4 in the lip of the chamber itself faced opposing to each other so they would attract....it was a very long build! "9 1/2 x "3 1/4 Cherry, Walnut and Curly Maple with African blackwood highlights, 4 coats of WOP and Beall buffed.