I've seen many good remarks here on SMC regarding this machine, strongly considering the purchase.
I've been looking at the manual on the HF site, and some thing isn't adding up - that - or I am missing something....
The manual states:
120 Volts, 60 Hz, 2HP, Single Phase, 20 AMPS Peak
This suggests that a 20A circut has the potential of being pushed to it's limits, and that a 30A circut is really required (or convert the unit to 220v). Yet elsewhere in the manual, it talks about using a minimum of a 16ga extenstion cord.
So can someone tell me how the unit comes wired, give me the specs off the motor plate, etc?
Many thanks
Jim