Okay, I have never done a job where I raster, color fill, reraster, and new color fill. Could someone provide some steps on how to get everything lined back up or what kind of jig to build. Thanks Here is the file. I plan on painting the back of the acrylic white, reverse engraving the "no" sign through the white and vector cutting the circle out. I will then color fill the red for the "no" sign, put it back in the machine, reverse engrave the blue words through the white and red paint and color fill those. I might then spray the entire back with black so you cannot see the differences in color fills behind the white. Again thoughts on jig or setup to make sure everything is aligned. Here is the file I have. Sincerely, Jeff