Okey everyone, I got the table finished! I used Trans Tint #2006 dye, and 8 coats of wipe on poly over the QS white oak. I am very pleased with how it came out! Now for the chairs to match, starting them tomorrow. The top is 1 and 3/4 thick, and the leggs are 3 and half inches square. 6 foot long by 42 inches wide.The support rails underneath are also 1 and 3/4 thick. Thanks for looking, and I will keep you posted on the chairs! The pie safe in the background on one of the pictures is a piece I made last winter, with QS white oak. They match well.