I bought a quart of (Waterlox Original sealer/finisher) forfinishing a walnut chest I built. When I purchased it I had intended to use itas a rubbing finish, but the more I lookinto it, I’m not sure now if Waterlox is a hand rubbing finish or a brush on?Some recommend to let it cure for a week or better before rubbing. For handfinishes in the past I’ve mostly used my own mixture of tongue, linseed,varnish and some mineral spirits; Multiple coats keeping it soaked for about anhour and rubbing it down. My plan was to use the Waterlox the same way, but nowI’m not sure? Thanks