hello everyone,
i was wondering if anyone has figured out how to convert to DPI from the known 'interval (mm)' setting with the RDCAM software.
thanks!
hello everyone,
i was wondering if anyone has figured out how to convert to DPI from the known 'interval (mm)' setting with the RDCAM software.
thanks!
Shenhui 9060 100W reci tube, CorelDraw X7
3D Printers:
Ultimaker 2
Micro 3D
Delta
1 inch is 25.4mm . , so if the interval is 0.1mm , then you divide 25.4 by it
ie 25.4/0.1 = 254 dpi
if you want 300 dpi , then divide 25.4 by 300 = interval of 0.0846666666
I see if you try to enter 0.0866666 , the program defaults to 0.09 which is actually 282 dpi.
Last edited by Rodne Gold; 03-23-2013 at 1:20 AM.
Rodney Gold, Toker Bros trophies, Cape Town , South Africa :
Roland 2300 rotary . 3 x ISEL's ..1m x 500mm CnC .
Tekcel 1200x2400 router , 900 x 600 60w Shenui laser , 1200 x 800 80w Reci tube Shenhui Laser
6 x longtai lasers 400x600 60w , 1 x longtai 20w fiber
2x Gravo manual engravers , Roland 540 large format printer/cutter. CLTT setup
1600mm hot and cold laminator , 3x Dopag resin dispensers , sandblasting setup, acid etcher
Here's a handy chart for dpi/scangap conversion
Scan_Gap_to_DPI_25.jpg
thank you both!
that's exactly what i needed!
Shenhui 9060 100W reci tube, CorelDraw X7
3D Printers:
Ultimaker 2
Micro 3D
Delta
Thanks for the chart, Vicki.
Roy
Roy
_______________________________
G.Weike 80W LG900N 600x900mm laser
LaserCut 5.3, CorelDraw 12, Inkscape, TurboCAD 19
Homemade 3-axis 18x51" CNC router
Vectric Aspire 8, PhotoVCarve, Mach 3
EurekaZone track saw system
That's good info
@ Rodney would you mind re-posting that in the Shenui thread so it doesn't get lost?
Shenhui G460 80W RECI
LIAOCHENG RAY FINE RF-6040-90W RECI
Corel X5 Technical Suite, Windows 7