Hey guys!!!
I'd like some advice on pricing. Please be gentle. I know how to build this I just want to make sure I don't low ball myself or over bid and be or of consideration for the job.
Here are her specs. I'm thinking poplar for face frames and raised panel doors. I have accounts with lumber and hardware suppliers so I get discounts on materials. I'm thinking I'll build the carcasses on site and then build the face frames and doors in my shop. It is an 80 mile round trip so I'd like to get it done in 2-3 trips hopefully just 2. I'm mainly looking for labor advice. I plan to creat my BOM and charge her the undiscounted materials price. Unless there is a better way to do it. I'm all ears.
I'm thinking pocket screws for carcass and face frame construction. Quick, sturdy and easy.
"I would like a custom built in wardrobe/closet for my bedroom. The unit would measure 100 inches in length, 24 inches in depth and about 9 feet 9 inches in height. It would have 5 doors (similar to the picture with brass knobs in the center of the door). The unit would be comprised of 3 units total - 2 units would be 40 inches in length and 1 unit would be 20 inches in length. The larger units would have two hanging rods and about 3 or 4 drawers on the bottom. The smaller unit would be placed in the middle of the 2 larger units and it would have shelves on the top and drawers on the bottom."
Thanx in advance guys!!!