Started designing a cabinet to fit under the right wing of my Delta CS, I want to store my 10" saw blades and a 8" dado set in the bottom drawer. My Dado set did not come with a plastic case so I've got to come up with something like a double side wooden case to store it in so that it could slide down into a designated slot. Has anyone ever seen or heard of a shopmade dado case?

For storage of the blades I was going to use hardboard dividers held in place by boards on each side with dado's every inch or so. The drawer width will be approx 22" so I'll put a divider at the appropriate distance for the blades. Drawer depth will depend up the dado storage solution.