Any updates on the Veritas shooting board plane?

[Eugenio Musto]

Shouldn't take long to save, I believe this one is around $100 .....

I believe there are seven more after that though.....

Cheers,

Rob
(Hangin' at O'Hare....)

Ok,we know that regarding chisel there will be mortice chisels,regarding sawing there will be a tenon saw.Regarding planing...mmm,100$...ok I try to hit it,some kind of metal moulding plane and there will be many size available with different sole radius?

[george wilson]

Eugenio,the last part of your post,about molding planes,is totally beyond my comprehension. There are no molding planes being discussed. I wish I was in Italy again!!

[David Weaver]

I might be imagining things (which happens all the time, I guess), but I think Rob may have mentioned some sort of moulding plane or moulding tool somewhere on the horizon.

I doubt the $100 plane will be a swappable moulder, though.

[Chris Griggs]

I don't recall Rob ever mentioning one. I think Eugine was just taking a guess at what the $100 mystery plane might be. I'm pretty stumped by that actually.

[David Weaver]

Chalk it under the imagining things, then. It happens often.

[Chuck Nickerson]

Deciding to make a LH version delayed us a bit
Rob

I'm right-handed but the LH version is nice for shooting long-grain edges.
(Yes I have a lot of planes, so shoot me.)

[David Weaver]

so shoot me.)

As in bang bang, or ...this is a thread about a shoot board, plane. Maybe you mean someone should lay you over somewhere and shave some off?

If LV made a people shooting plane, that would be very soylent green.

[Eugenio Musto]

Eugenio,the last part of your post,about molding planes,is totally beyond my comprehension. There are no molding planes being discussed. I wish I was in Italy again!!

I simply try to hit which kind of new plane Rob is speaking about.

[Jim Neeley]

Shouldn't take long to save, I believe this one is around $100 .....

I believe there are seven more after that though.....

Cheers,

Rob
(Hangin' at O'Hare....)

Hey Rob,

When are you going to accept direct payroll deposit for non-employees? <g>

Jim in Alaska

[Scott Stafford]

I've got to divorce my wife!

I can't afford to support both her and Rob Lee on my salary.


Scott in Montana

[David Weaver]

Rob's going to need a pick-me-up after the current hockey series is over, so you'd better plan on spending a little extra on him, too. Tell the wife she'll have to rough it for a while.

[John Sanford]

Do have another plane in production right now.. But will wait for some else to post details first....don't want to ruin any surprises for those attending Handworks in Amana.........

Cheers,

Rob

Ohhh, that's just eeeevil.

I figured y'all were going to be announcing something at Handworks. I just hope I'm not missing out on some good discounts, between the remaining (as of right now) 3 planes and some chisels on my want list, I've still got a handful of Benjamins to throw your way.

[Scott Stafford]

Congratulations Scott !!.....I too am desiring a 51 but am waiting on LV to, at least, show their hand.....the LN 51 will be hard to beat and sometimes the heart wants what the heart wants. Please show some pics and impressions after you get your plane.

Sadly I only had time to open the box. Won't get to a chance to tune the blade and try it until tomorrow. It's torture.

Scott in Montana

IMG_0214.jpg

[Chris Griggs]

Purdy!!!!!

[Bob Jones]

Hi,

Deciding to make a LH version delayed us a bit

Rob

stink. There goes that excuse for not buying. I love LH stuff!