Does anyone still have a good version of the Aztec calendar or can direct me to the best version available for laser engraving
Bryan
Does anyone still have a good version of the Aztec calendar or can direct me to the best version available for laser engraving
Bryan
Several good ones have been posted here over the years.. A search should turn them up.. I would post the link, but then I would be spoiling the 'search' fun...
Oh Ok here it is...Keith posted one in 2006...
Aztec/Mayan Calendar
Last edited by Bill Cunningham; 05-11-2013 at 10:32 PM.
Epilog 24TT(somewhere between 35-45 watts), CorelX4, Photograv(the old one, it works!), HotStamping, Pantograph, Vulcanizer, PolymerPlatemaker, Sandblasting Cabinet, and a 30 year collection of Assorted 'Junque'
Every time you make a typo, the errorists win
I Have to think outside the box.. I don't fit in it anymore
Experience is a wonderful thing.
It enables you to recognize a mistake when you make it again.
Every silver lining has a cloud around it
I think Epilog Laser has one available to all to use .. I think it is in the sample section if i am not mistaken,
To the people who correct grammar to prove a point
Aoccdrnig to a rscheearch at Cmabrigde Uinervtisy, it deosn't mttaer in waht oredr the ltteers in a wrod are, the olny iprmoatnt tihng is taht the frist and lsat ltteers be at the rghit pclae. The rset can be a toatl mses and you can sitll raed it wouthit porbelm. Tihs is bcuseae the huamn mnid deos not raed ervey lteter by istlef, but the wrod as a wlohe."卍卍
I have one that I cleaned up a lot. It is .dxf if that's the format you want.
Here's one based on the calendar Bill Cunningham uploaded. I spent a few hours on it closing up curves so that they could be filled.
I've included both here..unfilled in Corel Draw format and filled in Illustrator. Nice to have a decent vector that can be enlarged without loss
Ron
Anyone have it in a ecp file? Thank you.
Rabbit RL-80-9060
Roland SP-540i
Graphtec ce5000-60
Graphtec fc7000-100
Happy HDC2-1501
Juki 1541s