I misplaced the height gauge for my 2 inch lens on my Universal laser. Could someone please measure theirs from the bottom to the start of the notch that the carriage bumps into?
[OP]
Member
I misplaced the height gauge for my 2 inch lens on my Universal laser. Could someone please measure theirs from the bottom to the start of the notch that the carriage bumps into?
Universal M-300 (35 Watt CO2)
Universal X-660 (50 Watt CO2)
Hans (35 watt YAG)
Electrox Cobra (40 watt YAG)
Glass With Class, Cameron, Wisconsin
Moderator
1.890 on mine.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
Contributor
1.89 on mine also
Universal v-460 50 watt with rotary
CorelDraw x6, Photograv 3
Garage full of wood working tools
[OP]
Member
Thanks guys. I was using 1.9 but wasn't sure.
Universal M-300 (35 Watt CO2)
Universal X-660 (50 Watt CO2)
Hans (35 watt YAG)
Electrox Cobra (40 watt YAG)
Glass With Class, Cameron, Wisconsin
Posting Permissions
Reply With Quote