I wonder if Tim or anyone else with the Stanley 150, would care to comment on what saws they have tried using in their miter box? Has anyone actually tried using a panel saw or maybe a half back in this box? I understand that saws with backs that do not work in two post miter boxes should work in the 150. I hope this means that many of the larger saws made by Bad Axe or Ron B will work in it? I am also wondering about the size of the box. My MF 74C has a 19" long heavy metal box. The box on the S 150 appears to be more like the 12- 16 " boxes on the smaller MF miter boxes.
My new bench will have a Veritas QR Tail vise on it. I am thinking of mounting the 150 on a bench hook with a tab (made to the thickness of the Tail Vise jaw) which the tail vise can clamp to, holding the jig in place at the edge of my bench. Should be very fast to set up and super sturdy.