I will have a full house of cabinets, mill work, doors, railings that I'd like to finish.
I have used Target and General products somewhat but don't have experience with all of them.
I have used Target EM6000 and find it easy to use and gives good results. I have also tried EM9300 and the final result wasn't much different than EM6000.
I have used a small amount of General EnduroVar Urethane (which goes on pink and has a bit of amber tone). The application didn't seem much different than
the other two, but does have the added amber tone. There are other top coats from the two companies.
What I'd like to find from those with experience with them is which one you'd recommend for kitchen cabinets, interior doors, mill work (baseboards, mouldings, etc),
railings of stairs, and which one you would not. All are going to be sprayed using a HVLP system.
The ones I'm considering are:
- Target EM6000
- Target EM9300
- Target EM2000
- General Enduro Clear Poly
- General Enduro Pre-cat Urethan
- General EnduroVar Varnish
Aside from some being clear or having an amber tone, what would be the main difference of final result or the way the are applied in terms of durability, ease of application (self seal or requires sanding in between coats), etc?
TIA