Normally i have been entering text in Corel Draw using the standard method, clicking on the 'A' in the tool bar.
So today I thought I could speed the process up so I don't have to align the text up with my object every time its entered and thought using the Paragraph Text
function would do the job. The problem I run into is, I have the Paragraph Text frame centered both horz. and vert. where I want it but the text within the frame
is actually not in the correct position its suppose to be.
The RED text in the attached picture is the same text entered in by selecting the 'A' in the tool bar and according to my object, that is the correct position for engraving it.
I have the Horx. and Vert. both set at Center in the Paragraph text frame alignment settings, but its not centering correctly. Is there some other setting I am missing?textbox.jpgstdtext.jpg