Hey all.
One of our X2-660's appears to be firing on only one of the laser cartridges.
I did an alignment check: at 100% laser 1 reads 62W on our power meter, laser 2 reads 0W.
I swapped the wires between the lasers and got similar results: at 100% laser 1 reads 66W, laser 2 reads 0W.
So, it appears the laser cartridges are OK.
Mirror alignment looks OK.
Obviously I'll call ULS support tomorrow, but thought somebody here might be able to help troubleshoot tonight.
Anybody care to speculate?
Power supply?
Beam combiner?
Thanks,
-kg