The two belts that drive the drum are starting to slip, so I'm assuming I will probably need to replace them. Has anyone done any maintenance on the Woodmaster drum sanders that might have some lessons/techniques learned? Thanks.
[OP]
Member
The two belts that drive the drum are starting to slip, so I'm assuming I will probably need to replace them. Has anyone done any maintenance on the Woodmaster drum sanders that might have some lessons/techniques learned? Thanks.
Member
I don't have that particular machine but are you sure the tension on the belts is proper? Adjusting the tensions is sometimes a very easy fix.
Contributor
Call Woodmaster, they are Very helpful. You could also try checking to see if the belts are glazed or just stretched enough to need adjusting
Posting Permissions
Reply With Quote