I currently have an old Craftsman TS with a Vega Pro fence with 52" rip capacity but I just bough a Grizzly G1023SL off craigslist. The new saw has the standard rails and I am wondering if I should buy the longer rails for it. I have the room for it in the garage and I usually move the saw outside to cut anyway. Right now the only time I use the extra capacity is crosscutting long pieces, usually Face frame pieces and cabinet sides, bottoms, nailers etc. I use a crosscut sled and a spacer block clamped to the fence to get very easily repeatable cuts and I feel I would definitely miss that. Any thoughts?