I just bought the fixed base/plunge base pair. Initial impressions--jury still out. Plastic sub base on fixed base model was cracked, replacment recieved today. Setting depth on plunge router not nearly as easy as it could be. I find it easiest to set router on 2 spacers w same dimensions as plunge depth desired and then play w fine adjustment for fine tuning plunge depth
My question, do I need to buy 2 adapters to use my PC bushing set...............RA1100 and RA1126? Or am I better off buying Bosch bushing set for $25
Anyone using the optional edge guide RA1054...............I am thinking of ordering this from Amazon ASAP