Hello. My 240V Laserworld 9060 machine from China has been out of operation for too long. A couple months ago it cut out in the middle of operation, tripping the 120V shop circuit along with it when it did. After inspecting the 120-240 step up converter, the power supply etc. I finally think I figured out that the power strip I was using to operate everything from was broken. It took a long time to send in parts I thought were possibly broken (Power Supply, Transfer Board) and get them back. Now the machine will turn on (lights, Power Supply) but not operate (the control cards and motors are seemingly not getting power passed on to them, see video). I have been trying to troubleshoot this with the Chinese but things are going very very slowly.
There voltage reading going INTO the Transfer Board is, I believe, 0 and coming out it is 240. Any ideas please?