I have a Laguna LT16 bandsaw. I want to try an Infinity Re-saw bandsaw blade. My bandsaw takes a 130 inch blade. The Infinity offers a 125 and a 131 1/2" blades. Will the 131 1/2" work. I don't want to have to send a blade back because it's too big.
I have a Laguna LT16 bandsaw. I want to try an Infinity Re-saw bandsaw blade. My bandsaw takes a 130 inch blade. The Infinity offers a 125 and a 131 1/2" blades. Will the 131 1/2" work. I don't want to have to send a blade back because it's too big.
I think you need a 130" blade? I never heard of a range of sizes, you buy what it takes.
Call Infinity to get them to make you a blade the size the saw wants. Especially in the larger saws, custom blades are common.
You might try the Bladerunner ones from Louis Iturra. These are the same as he Woodslicer but a little less expensive. He'll weld any length you need.
Iturra Design
(904) 642-2802
I have had good luck with the Laguna blades.
The Resaw King is pricy, but the Shear Force blades are close to the Infinity blade you were looking at for $45.
http://www.lagunatools.com/accessori...-3-4-TPI-X-130
You might want to give it a look if you want an off the shelf 130" blade.
I have a LT-16 ... and I'm pretty sure that the blade length is 145" ... better check before you order anything.
edit: Oops ... sorry 'bout-that ... I have a 'HD' 16 ...
Last edited by Sam Puhalovich; 06-16-2015 at 6:30 AM.