Golf Course Hole Markers.jpg
I've been tasked with revising the hole markers on the base golf course and need some viable ideas.
The markers are granite, but they want to change the hole numbers and yardage on each. (see attached,
the area outlined in red is what I'll need changed) I'm hoping to find a thinner substrate that I can laser
cut and maybe engrave/color fill. I may end up going with vinyl numbers if I can find a suitable substrate.
If I do a fill any recommendation on what would hold up outside in all kinds of weather and sun exposure?
I need to laser cut, as some of the layouts for the holes come too close to just make it regular rectangle.
I'll have to shape around it on those.
Also they want a material that doesn't clash with the granite.
My first though it acrylic about .25 inches thick to help keep it from warping, then spray with a silver hammer Krylon Fusion.
then use vinyl for the numbers and such.
A granite company wanted $150ea aver. to do it.
One more thing will be attaching it to a glossy granite, Epoxy, Silicone?
Thanks in advance for any input!