What happened to the g0634xp?

[Derek Voigt]

I have been planning out my future shop basically every day I'm in my current shop. I had always planned to upgrade to a grizzly g0634xp because it is a 12" combo with sprial head and can go closer to a wall then some of the other models. But now it isn't in their catalog?
What happened to it?
what other options are out there?

Derek

[Sean Troy]

http://grizzly.com/products/12-Plane...campaign=zPage 12" with spiral cutter head.

[Derek Voigt]

My issue with that one is they call out the size as 59.5"x45"x42". 42"?! I need almost 4' from the wall to house that. The g0634xp was 67.5"x41.5"x24". Better in every dimension for my shop

[Anthony Whitesell]

I see the difference between the XP and Z models. The XP has an 'end mounted' fence that resembles the fence of a tablesaw or bandsaw. The Z fence is mounted like most other jointers, extending from behind the cutterhead.

[Derek Voigt]

Maybe they are working on a 16" version for under $3,000 ��

[Frank Drackman]

My issue with that one is they call out the size as 59.5"x45"x42". 42"?! I need almost 4' from the wall to house that. The g0634xp was 67.5"x41.5"x24". Better in every dimension for my shop

I get 25" out from wall when I measure my GO634XP

[Derek Voigt]

I get 25" out from wall when I measure my GO634XP

still a lot more compact then 42"

[Augusto Orosco]

still a lot more compact then 42"

That's exactly why I bought the G0634XP about a year ago. The 42" was a deal breaker for me. Too bad is no longer available.

[Derek Voigt]

I suppose I can always look at the Jer version, looks to be about 30" wide. Or if I have enough cash maybe look at the felder or minimax versions

[Shiraz Balolia]

I have been planning out my future shop basically every day I'm in my current shop. I had always planned to upgrade to a grizzly g0634xp because it is a 12" combo with sprial head and can go closer to a wall then some of the other models. But now it isn't in their catalog?
What happened to it?
what other options are out there?

Derek

Still available, but out of stock for 3 months.

http://grizzly.com/products/12-Plane...campaign=zPage

[Derek Voigt]

Still available, but out of stock for 3 months.

http://grizzly.com/products/12-Plane...campaign=zPage

weird because it isn't in the most recent catalog I have. I couldn't find it on their site when I searched for it. Fingers crossed

[John Sanford]

weird because it isn't in the most recent catalog I have. I couldn't find it on their site when I searched for it. Fingers crossed

You don't have to cross your fingers much. If it doesn't show up, you can take it up with with Grizzly's President.

That would be Shiraz.

[Derek Voigt]

You don't have to cross your fingers much. If it doesn't show up, you can take it up with with Grizzly's President.

That would be Shiraz.

or take up the need for an (affordable) 16" sprial combo in the same configuration!

[Ronald Blue]

You should read the posts. You had a reply from Shiraz. Temporarily out of stock.

grizzly.com/products/12-Planer-Jointer-with-Spiral-Cutterhead-Polar-Bear-Series/G0634XP?utm_campaign=zPage