-
I use 3/4 ply for the top, bottom, and sides. The added thickness gives plenty of meat in the corners where the joinery is. I use 1/4" for the back. There's a nail rail at the top, either inside the box, or better yet outside, for cabinets that don't go to the ceiling. There's no reason for thicker material on the back. The spray finish goes on before the back gets stapled on the rear.
Last edited by Jamie Buxton; 04-29-2016 at 10:22 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules