Hi all, I recently purchased a Powermatic #25 shaper equipped with a drum style reversing switch with is a dual voltage 230/115V motor. When purchased the motor was wired for 230V, but I would like to convert it to 115V. The motor has a diagram for the conversion, but is not accurate because of the reversing switch. I have 6 leads coming out of the switch into the motor, 2 oranges, 2 yellows, and 2 blacks. After removing the cover of the switch, it appears the blacks are the lines, but I have no idea what to do with the other wires. Currently wired at 230V I have the following configuration
Orange- wires 3 and 2
Orange - wire J
Yellow - wire 5
Yellow - 8
I'll get some pictures tonight and post which wires the blacks are hooked up to. Any help would be appreciated.