Looking for a custom router bit maker.

[Elman Concepcion]

Can anyone recommend someone to make me a router bit ?
I’m in central Florida but don’t mind working with someone across the country.

Thanks
Elman

BTW - what I need is a two flute, 36mm R - 24mm D - .25” shank.

[Mike Circo]

I can't imagine anyone with the tooling to create a router bit being willing or able to make a one off bit in a cost effective manner. That being said... Infinity Cutting Tools is out of Florida. Oldsmar, Florida to be specific.

I'm curious why you need such a specific bit and can't utilize a standard item?

[glenn bradley]

Whiteside Machine and Carbide Processors both offered this service in the past. I see that CP still offers it as seen on their website: "Get a quote on a Custom Router Bit or Call 800-346-8274 for a quote." Tell 'em I sent ya ;-)

[Elman Concepcion]

I'm curious why you need such a specific bit and can't utilize a standard item?

I’m making a double top guitar.
The cavity on the top goes down 1mm and the larger radius on the bit will give me a smooth transition area on the edge.

[Elman Concepcion]

Whiteside Machine and Carbide Processors both offered this service in the past. I see that CP still offers it as seen on their website: "Get a quote on a Custom Router Bit or Call 800-346-8274 for a quote." Tell 'em I sent ya ;-)

Thanks Glenn - I'll give them a call.

[peter Joseph]

Elman, Surely that can be achieved by using multiple bits, no?

[Jerome Stanek]

Onsrud also offers this service

[Elman Concepcion]

Elman, Surely that can be achieved by using multiple bits, no?

Not really. The geometry does not work for my application.

[Elman Concepcion]

Onsrud also offers this service

Thanks - I'll look into them.

[pat warner]

Dime a dozen, probably could be made from extant cutter. SouthEast tools, NC.

[Steve Jenkins]

Sounds like a mighty big bit for a .25 shank.

[Elman Concepcion]

Steve the bit is only 24mm diameter.
Less than 1".
It's the 36mm radius (almost 1.5 R" ) that is hard to find.

Thanks

[Elman Concepcion]

Dime a dozen, probably could be made from extant cutter. SouthEast tools, NC.

Funny, this thread went from " can't imagine" to "Dime a dozen"
I'll look in to them too.
Thank You.

[John TenEyck]

Dynamic Saw in Buffalo, NY makes custom router bits, in solid carbide, too, on an amazing, one of a kind CNC grinder. Give them a call.

http://dynamicsaw.com/

[johnny means]

When I have a situation like this, the hand told come out.