Cnc cabinet
Originally Posted by
Bruce Page
Steve, not counting the rather expensive casters, I made my table for a couple hundred bucks while I waited for delivery. I located the PC inside it to protect it from dust. I mounted a USB port ,on the front of the cabinet so I never need to open the cabinet door. There's enough air volume inside the base that the PC never gets hot.
Having never used the A11 controller, I can't make a comparison between it and WinCNC. I can say as a retired machinist with experience going back to the "NC" days - prior to CNC, that the WinCNC package is very good.
Bruce would you tell me how large the spaces you have your computers in and whether it's 1 or 2 or three computers they say copying somebody is a Compliment I really like the base you made
Thanks John
Don't take life too seriously. No one gets out alive anyway!