I was the bald guy in the back. I live up in northern Wisconsin. The reason I ask which software is I thought Mike said you can only import one stl file while making a project in Vcarve. Does that apply only to files not purchased from Ventric? Btw the eagle/flag looks fantastic!
All the models that you get from Vectric you can mix and match with one another and use as many as you'd like I think what he was referring to was making them I think you can only make one at a time but I'm not real sure on that
Thanks John
Don't take life too seriously. No one gets out alive anyway!
finally finished the Eagle,usedBruce Page suggestion warm toned stain The piece is made out of Pine used a wood conditioner And two coats of satin clear finish
Thanks John
Don't take life too seriously. No one gets out alive anyway!
First let me thank both of you for attending the Seminar in KC. I was the dumb guy in the front of the room that opened for Mike.
For clarification: You can import or use, mix/match as many Vectric models as you wish in a VCarve Pro design file. You can only import/use a single outside party file such as STL, OBJ, etc. You can import an STL and then a dozen Vectric models if you need. It is an "and" scenario, not an "or".
Gary Campbell
CNC Replacement & Upgrade Controllers
Custom 9012 Centroid ATC
go to designandmake.com